Product Description

Product Description

Dental Equipment Silence Oil Free Air Compressor

Model: MCD0056

Description
1. High quality, big flow oil free swing piston compressor as a source of power, can provide stable oilless air and avoid the oil stain into hunman body .

2. The parts are selecting high quality components and the machine made acc. 

3. To the requirement of dental clinic ,  focus on the features of large flow,  low noise, clean air ,smooth operation, long time continuous work, long life, full automatic control .  

4.In the operation process, when air tank pressure reach to the minimum or maximum  value ,the compressor will be automatically started  or shut down . It’s widely used for dental Comprehensive art therapy air , and is ideal choise for small dental hospital and private clinics .

Features

1. Ultra-quiet: The sound is very low when the air compressor is working to meet all requirements for indoor use.

 

2. Ultra-clean: Pure oil-free design, original oil lubricated piston system, high efficiency, low loss, ultra-clean exhaust gas, to meet the needs of the equipment, and protect the safety of the operator, so far as to response to the “green” global call.

 

3. Anti-rust coating: Inside the gas tank has rust, anti-bacterial treatment, to ensure gas cleanliness and product safety.

4. Low energy consumption: Pressure and gas production take on the CHINAMFG ratio, under the conditions of the least energy consumption fastest output up to the gas source, and automated design for starting and stopping , not only save power, the more you do not need worry.

5. Technology: cylinder liner system exclusive development of nano-coating technology to abandon ordinary oil-free material manufacturers, quieter, cleaner, longer life, to meet the more demanding areas, such as food, medicine industry.

6. Dry sterilization: Special double vacuum drying and filtration equipment, not just the removal of particulate impurities, little more than a sterilization effect, to meet the supply of high purity gas source and protect the user equipment.

7. Safety in Use: The machine is equipped with multiple automatic protection system, when use
environment voltage, pressure or current any exception will automatically shut down to protect the safety of equipment and personal.

8. Easy to use: Electrical connection with automated design, working without staff on duty; pressure can be adjusted freely according to requirements, without complicated maintenance, just regular water supply and drainage.
Stylish.

9. Appearance: CHINAMFG Medical Air Compressor have fashion design, good performance and practical, regulate the operation of the working life of 20,000 hours or more; various design are the industry’s top engineers for natural Thatcher.

Specification

Item Value
technical 5EW 128L for 5 dental chairs
Power supply 110V/220V AC 60Hz/50Hz
Operation speed 1635/Min
Nominal volume 210L/min
Starting pressure 0.5+-0.05Mpa
Rated exhaust pressure 0.8+-0.05Mpa
Gas tank volume 128L
Noise 68- 72dB
Gross weight 105Kg
Packing size 110*55*88cm (wooden box)

 

Company Profile

Certification: CE
Type: Air Compressor
Material: Metal
Gas Tank Volume: 60L
Noise: 68-72dB
Nominal Volume: 210L /Min
Customization:
Available

|

air compressor

How Do Water-Lubricated Air Compressors Contribute to Energy Savings?

Water-lubricated air compressors can contribute to energy savings in several ways, making them an attractive option for industries looking to optimize their energy consumption. Here are the key ways in which water-lubricated compressors help achieve energy efficiency:

  1. Reduced friction and improved efficiency: Water serves as a lubricant in water-lubricated compressors, creating a thin film between moving parts to reduce friction. This reduces the energy losses due to mechanical friction and improves the overall efficiency of the compressor. Compared to oil-lubricated compressors, water-lubricated models can achieve higher mechanical efficiency, translating into energy savings over the compressor’s operational lifetime.
  2. Elimination of oil vapor carryover: Oil-lubricated compressors require oil filtration systems to prevent oil carryover into the compressed air stream. These filtration systems consume energy and can introduce pressure drops. In contrast, water-lubricated compressors eliminate the need for oil filtration, reducing energy consumption associated with filtration equipment and minimizing pressure losses. This leads to improved system efficiency and energy savings.
  3. Improved heat transfer and cooling: Water-lubricated compressors offer enhanced heat transfer capabilities compared to oil-lubricated counterparts. Water has a higher specific heat capacity and thermal conductivity, allowing for more efficient heat dissipation. This results in lower operating temperatures and reduces the energy required for cooling the compressor. By optimizing heat transfer, water-lubricated compressors can minimize energy consumption associated with cooling systems or air conditioning in compressor rooms.
  4. Optimized system design: Water-lubricated compressors often employ advanced system designs that further enhance energy efficiency. For example, they may incorporate variable speed drive (VSD) technology, which adjusts the compressor’s speed and power consumption based on the actual air demand. This eliminates energy waste associated with constant-speed operation and reduces energy consumption during periods of low compressed air demand. Additionally, water-lubricated compressors may feature optimized internal components and improved air flow dynamics, resulting in reduced energy losses and improved overall system efficiency.
  5. Heat recovery opportunities: Water-lubricated compressors can provide opportunities for heat recovery. The heat generated during compression can be captured and utilized for various heating applications within the facility, such as space heating, water heating, or process heating. By harnessing this waste heat, water-lubricated compressors contribute to energy savings by offsetting the need for additional energy sources for heating purposes.

By combining these energy-saving features, water-lubricated air compressors help optimize energy consumption, reduce operational costs, and minimize the environmental impact associated with compressed air systems. Implementing water-lubricated compressors with a comprehensive energy management strategy can result in significant energy savings and improved overall sustainability for industrial operations.

air compressor

Are There Any Potential Water-Related Issues with These Compressors?

Yes, there are potential water-related issues that can arise with water-lubricated compressors. Here’s a detailed explanation of some of the common water-related issues associated with these compressors:

Corrosion:

  • Internal Corrosion: Water-lubricated compressors are susceptible to internal corrosion due to the presence of water within the system. If the water used is not properly treated or if corrosion prevention measures are insufficient, the internal components of the compressor can corrode over time. Corrosion can lead to reduced performance, component damage, and the potential for leaks or system failures.
  • External Corrosion: External components such as piping, valves, and fittings can also be affected by corrosion if exposed to water and moisture. Corrosion on these external surfaces can lead to compromised integrity, leaks, and reduced system efficiency.

Water Quality:

  • Water Contaminants: The quality of the water used in water-lubricated compressors is crucial. If the water contains contaminants such as sediment, debris, oil, or chemicals, it can negatively impact the performance and reliability of the compressor. Contaminants can cause blockages, clogging, increased wear on components, reduced lubrication effectiveness, and potential damage to the compressor.
  • Water Hardness: Water hardness, characterized by high mineral content, can lead to scaling and deposits within the compressor and associated components. Scaling can restrict flow, impede heat transfer, and reduce the efficiency of the compressor. It can also contribute to fouling and corrosion issues.

Water Treatment and Filtration:

  • Inadequate Water Treatment: Insufficient or improper water treatment can lead to various issues. If the water is not adequately treated for contaminants, hardness, or pH levels, it can result in accelerated corrosion, scaling, fouling, and reduced lubrication effectiveness. Inadequate water treatment can also contribute to increased maintenance requirements and decreased overall compressor performance.
  • Filtration System Issues: Filtration systems play a crucial role in removing contaminants from the water. However, if the filtration system is not properly maintained, filters become clogged or damaged, or if there are design or installation issues, it can lead to inadequate filtration and compromised water quality. This can result in the accumulation of contaminants, reduced lubrication performance, and potential damage to the compressor.

Water Supply and Availability:

  • Insufficient Water Supply: Water-lubricated compressors rely on a consistent and reliable water supply. If the water supply is insufficient in terms of flow rate, pressure, or quality, it can impact the compressor’s operation and performance. Inadequate water supply can lead to inadequate lubrication, reduced cooling capacity, and increased wear on components.
  • Water Source Availability: The availability of a suitable water source is essential for water-lubricated compressors. In certain locations or applications, accessing clean water or meeting specific water quality requirements may pose challenges. Lack of a suitable water source can limit the feasibility or effectiveness of using water-lubricated compressors.

It is important to address these potential water-related issues by implementing proper water treatment, corrosion prevention measures, regular maintenance of filtration systems, and monitoring of water quality. Adhering to manufacturer guidelines, performing regular inspections, and taking proactive measures can help mitigate these issues and ensure the reliable and efficient operation of water-lubricated compressors.

air compressor

What Maintenance Is Required for Water-Lubricated Air Compressors?

Maintaining water-lubricated air compressors involves several key maintenance tasks to ensure their optimal performance and longevity. Here are the maintenance requirements typically associated with water-lubricated air compressors:

  1. Regular water quality checks: It is essential to monitor the quality of the water used for lubrication in the compressor. Regular water analysis helps identify any potential contaminants, such as minerals or impurities, that may affect compressor performance or lead to corrosion. If necessary, appropriate water treatment measures should be taken to maintain the desired water quality.
  2. Drain and flush water systems: Periodically draining and flushing the water systems of the compressor helps remove any sediment, debris, or accumulated contaminants. This prevents blockages, maintains water flow, and ensures the cleanliness of the system.
  3. Inspect and clean filters: Filters in the water system, such as intake filters or water separation filters, should be inspected regularly and cleaned or replaced as needed. Clean filters help maintain proper water flow, prevent clogging, and protect internal components from damage or corrosion.
  4. Check for leaks: Regularly inspect the compressor system for any signs of water leaks. Leaks can lead to water loss, reduced lubrication performance, and potential damage to the compressor components. Any identified leaks should be promptly repaired to maintain the integrity of the system.
  5. Monitor and maintain proper water levels: Ensure that the water levels in the compressor are maintained within the recommended range. Low water levels can result in inadequate lubrication and increased friction, while high water levels may lead to excessive moisture in the system. Regularly check and adjust the water levels as necessary.
  6. Inspect and maintain cooling systems: Water-lubricated compressors often utilize water for cooling purposes. Inspect and maintain the cooling systems, such as heat exchangers or radiators, to ensure proper heat dissipation. Clean any accumulated debris or deposits that may impede cooling efficiency.
  7. Follow manufacturer guidelines: It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the water-lubricated air compressor model being used. These guidelines may include additional maintenance tasks or intervals that are necessary for optimal performance and warranty compliance.

Regular and proactive maintenance of water-lubricated air compressors helps ensure their reliable operation, extends their lifespan, and minimizes the risk of performance issues or component failures. It is advisable to consult the compressor’s documentation and seek guidance from the manufacturer or a qualified technician to establish a comprehensive maintenance routine specific to the equipment.

China Custom Dental Equipment Silence Oil Free Air Compressor for Five Dental Chairs   portable air compressorChina Custom Dental Equipment Silence Oil Free Air Compressor for Five Dental Chairs   portable air compressor
editor by CX 2023-10-16

Water Injected Compressor

As one of the water injected compressor manufacturers, suppliers, and exporters of mechanical products, We offer water injected compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of plastic water injected compressor.

Recent Posts